Hello,
I have a tyga body kit(older style) and i cant find how to attach a number plate, I bought the kit 2nd hand(off Craig), am I ment to of had a number plate bracket?
Cheers in advance
shaun

you can buy a bracket from jap4 or just use some Velcro pads to stick plate to the reflector..that's what I did!

Thanks for your reply,
I could not see any numberplate brackets for any of the tyga body kits on the jap4 website, and on the tyga performance website I could only find a numberplate bracket for the newer style tyga body kits, I would like the proper number plate bracket, how come you are not using bracket and you have just chosen to stick it onto the reflector? has the number plate ever come off thise reflector? do you still have the proper number plate bracket?
Cheers
shaun

erm, when i bought mine it never had one either and the chap i got it off had been doing it the same way so i just carried on! plate never came off. i had a really sticky velcro pad and it was bloody hard to even pull it off! give gavin at jap4 a call im sure he will help you. good luck.

heres how it looked with a smaller plate, i did use the original plate and it was still ok as well.

thank you for your help, looks like il be doing it that way then, looks like you got the same rear shock as me he he

........it gets expensive. good luck fella get some pics up and et us have a look!

yeah i guess it does get expensive, I have a full tyga body kit in the konica minolta colour scheme, ISR levers, nitron rear shock, with some carbon bits, I think the bike only owes me about £3k, which is not bad as its got more trick bits then my R6 had and cost half the price, my bike is very nearly done now, so pics to come soonish :)

i had one of the first tyga body kits and it dident come with a bracket so i made one out of a small piece of 1.5mm ally plate and attached it on the back of the small reflector just put some longer bolts through it and attach it to these its neat, light and wont fall of in a hurry, ill see if i have any pictures of it, its a dodle to do though, i made mine out of an old kick plate off a door. it is shaped like the shape bellow, hope this is of some help.



______
__| |__
|___________|

lol should have done a preview cos the shape is all messed up now, sorry, it is a sort of an upside down T shape, ill look for a picture.

Thankls for your help guys, I have just stuck it on the red reflector with double sided number plate tape that they use on cars.
Cheers again