Hi guys need some help with what size bolts to get to replace my chewed up old ones, can someone help me and tell me the size of bolts i require for the engine mounting bolts and also the nuts and studs for the front and rear exhaust ports / manifold.

thanks

Steve

The exhaust manifold to cylinder head studs/nuts are M6 standard pitch, length I don't know off the top of my head.

The three studs on the rear manifold to exhaust downpipes are M8 standard. Length?

Engine mounting bolts are M10 x 1.25mm (fine metric), lengths vary between 35 and 65mm long. Note the thread here - NOT M10 standard (1.50mm)