peeps will the header pipes fit from a NC29 onto a NC23 or are the totally different?

Cheers
Viv

It's not a straight swap - I believe the horizontal difference measuring between the ports is different from 23 to 29 - I doubt it's worth the effort in making a set fit compared to hunting for the correct headers at a good price - I got lucky, £90 delivered for a stainless set in vgc from a breakers advertising on ebay.

ASk G france for the defacto data as he makes the pipes - I have asked him - an as i recall - YOU HAVE TO MOD THE MOUNT LUGG other than -> an nc 29 is en exact swap. Stimpy on here says this is what you do in OZ as the 23 zorst is hard 2 find .....

yep,the headers will fit,u need to cut off the lower mount (where it mounts to the frame)and reposition it to suit the 23...thats the headers,for the rest of the system i remade to give more clearance for racing(high mount)..as that is not a direct fit for the 23
any exhaust shop could bend up the piece for next to nothing
if i could find a race system cheap enough i'd do the same again
stimpy

lol...in oz,the 23 in general are hard to find...i know of only 2 others racing here in oz...
plenty of 29's tho.
stimpy

I'll keep hunting for NC23 ones then I think

although I think (now I've discovered it) that the snapped bolt where they affix may have something to do with the blowing, my other half fitted these and failed to mention his mishap!
only noticed yesterday when I gave it a good scrub

u can slap your other half from me if u like
lol
stimpy

Yo stimpy,

I just fitted a different exhaust to my bike, and my Megacycle system might be looking for a new home if you're interested.

I sell you cheap! :D

we speak sunday greg!!
also...will u be using your 39t rear sprocket??
may i borrow if your not??
stimpy

Can anyone give a difinitive on the 23 exhaust fitting on to the 29 as ive a Beet ti over in Japan for the 23 but would like to run it on the 29? so will not bring it over if it a no.
Cheers Chris.