Is there a mixture adjustment screw on the carbs and if so where i cant see one (carbs still attatched to bike).

Thanks for the help

http://www.400greybike.info/newforum/vi ... rew#p50432" onclick="window.open(this.href);return false;



it was asked before,this should help you out and tell you what you need to know.




william

oh and it wasn't mentioned in the other thread above or this one but theres a mixture screw on each carb, so you have a total of 4 :-)

There all in the same place on each carb tho, what the screwdrivers turning on the pic in the other thread :-)

it is mentioned in the thread......as it say's "where the hell are the pilot screws"


as for the pic,that to me looks like viper is adjusting the pilot mixture screw...........


william

That is what the pilot screw is, it adjusts the mixture of Air / Fuel.

What screw are you thinking of?

And if you read the thread it just mentions pilot screws, it doesn't specifically say there is one for each carb

I'd presume its the A/F screw that he's talking about as the only 'pilot' in a carb is the pilot jet and its screwed in tight. The only one to adjust is the one in the picture I posted in the last topic.

Neosophist wrote:That is what the pilot screw is, it adjusts the mixture of Air / Fuel.

What screw are you thinking of?

And if you read the thread it just mentions pilot screws, it doesn't specifically say there is one for each carb

hold on a minute..........i know what its for

the one i am talking about is the pilot screw,the same one as viper has pictured,i misunderstood your message........i have just realised that you meant that the only thing that was not mentioned was there is 4 of them....my fault guys



william