I know a few people on here might be sick of answering this question,
But i've searched on here and the old forum with no luck

Can anybody tell me exactly what needs to be done to fit an RS250 shock to the NC30?
It's fairly simple isn't it?

Cheers

Let's have some links then matey... I would say the battery box will need moving..

I had the shock out of my RR5 yesterday, could have taken some pics and measurements if i had thought about it. anyway as mark says undertray and subframe i think would need a bit of work thanks to the res.

I Don't have any good pics of it as was just something i saw on ebay
Contacted the guy and he did have to move the battery box
Thanks for the help guys

I need info on an RS250 shock now :)
Might as well save space and change this topic

just fitted an rs250 shock the top mount steel/rubber bush was shortened to fit the frame on the nc and the bottom mount was machined to fit the rocker, though i believe you can do likewise with rocker to fit the shock, on mine res hose wont allow fitment behind passenger peg unless its de -pressurised and the banjo turned 360 which leaves me the prob of getting it regassed localy, there were loadsa posts about rs shocks on old forum dunno if its still available?