Can anyone please help me with the timing on my bike,how do i time it ? where are the timing marks?


As i am rather a novice on bikes please make your comments basic.

your in the wrong section dude. scroll down to the workshop in the honda v4 section, and repost there.

you will find a far better response

Ahhemm. Is this not the workshop section?

i think it is!!!!!!!

lol, yes this does make me look like a noob!!

check the Testing Forum, thats where this topic was originally posted, and where i originally replied to
topic is still there also.

Ahhah, its bin moved.

This is the timing configuration for an NC30, probably the same for an NC24. With T1 crankshaft mark aligned, cylinder 1 is at TDC of compression stroke when the two camshaft edge marks point up, cylinder 3 is at TDC when the two
camshaft marks point down. With crankshaft mark t2 aligned, cylinder 4 is at TDC of compression stroke when its two camshaft marks are pointing up, cylinder 2 is at TDC of compression sroke when its two camshaft marks are pointing down

Isn't the NC24 crank 180 and the NC30 crank a 360?

yes it is.

Mike google for the honda factory manual, it shud describe the procedure there