bought some chinese fairings for me vfr

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
hipringle
NWAA Supporter
NWAA Supporter
Posts: 214
Joined: Tue Apr 29, 2008 8:50 pm
Bike owned: 954 blade,
Location: west allotment, tyne & wear.
bought some chinese fairings for me vfr

Post by hipringle »

these, got him to knock some money off the buy it now & also throw in a free screen & mirrors.(as you do.....)
I know too well about differing quality paint & fit but looking at the photos as best I can the paint seems ok. Obviously the number board will be resprayed & new decal put on but at the price I think its worth a punt, when they arrive I,ll fit them & report back & take some close ups so you can compare different ebayers quality etc etc,

Managed to repair my originals today & they come out ok but still left a couple of lines where I touched the paint in, couldnt do a better job really unless it was resprayed properly so I thought bugger it, I,ll have a spare set.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEAFB:IT" onclick="window.open(this.href);return false;

fingers crossed they turn up, anything else is a bonus lol!
User avatar
jowyvfr
Site Supporter
Site Supporter
Posts: 161
Joined: Sat May 03, 2008 4:19 pm
Bike owned: Aprilia rs125, nc30,..Van Van!
Location: SW London
Re: bought some chinese fairings for me vfr

Post by jowyvfr »

My Favourite Paint scheme that one, had it on my bike originally, until I chucked it into a hedge! Plan to get it back one day.
Good luck with em get some pics up and a little review.
User avatar
Sligeach
Site Supporter
Site Supporter
Posts: 690
Joined: Wed Apr 30, 2008 4:02 pm
Bike owned: '90 NC30 - '12 Stripe R
Location: Sutton, Surrey
Contact:
Re: bought some chinese fairings for me vfr

Post by Sligeach »

http://www.400greybike.cc/newforum/view ... =23&t=1067" onclick="window.open(this.href);return false;

add the pics on to this thread, they are all there in one concise place
Sabre
Settled in member
Posts: 68
Joined: Mon Sep 15, 2008 12:24 pm
Location: Dubalin,Ireland
Re: bought some chinese fairings for me vfr

Post by Sabre »

Very very cheap fantastic fine keep posted with pics etc love that scheme wish i could find RWB fairings :-(
hipringle
NWAA Supporter
NWAA Supporter
Posts: 214
Joined: Tue Apr 29, 2008 8:50 pm
Bike owned: 954 blade,
Location: west allotment, tyne & wear.
Re: bought some chinese fairings for me vfr

Post by hipringle »

Just had them delivered half hour ago, tell you what the paint is as good or better than oe, I kid you not. I,m not going to fit them for another week or two as I,m busy servicing & fettling the bike & I,m putting the old fairings back on to photograph but when I do I,ll post some close up photos. I was taken aback with the quality of them,everything laqured in, the tailboard which I was going to change I,m now going to leave, it looks ok as the blue writing says motorcycle centre & doesnt look out of place. The plastics weigh about the same as oe, I can check later on that but the finish really is superb. there is one small flaw at a mounting point, the plastic hasnt been recessed the same as tother side but that should still be ok when fitted. The screen I asked for wasnt new but its a secondhand OE one lol, thats great tho as I needed another, mark (cmjmmsj), sent me one too so I have one for each fairing set.

Well, big thumbs up from me (up till now we,ll see how it fits but cant see there being much hassle considering the quality already shown......)
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: bought some chinese fairings for me vfr

Post by Cammo »

I bought some for a cbr954 once, you can't complain for the price.

The paint was top quality, but a lot of the graphics didn't line up properly and looked shonky.
"It's just a ride" Bill Hicks
User avatar
matty_boy
Settled in member
Posts: 208
Joined: Fri May 02, 2008 11:19 am
Bike owned: Fitness bike
Location: Norwich, Norfolk
Re: bought some chinese fairings for me vfr

Post by matty_boy »

Give it 3 month of riding with the paint.

Mine has worn off in a few places like at the bottom of the "V" pice.

But like you sat for the money ok.
hipringle
NWAA Supporter
NWAA Supporter
Posts: 214
Joined: Tue Apr 29, 2008 8:50 pm
Bike owned: 954 blade,
Location: west allotment, tyne & wear.
Re: bought some chinese fairings for me vfr

Post by hipringle »

all these graphics are fine & line up, like I said I,ll show pics in a few weeks when theyre fitted.

The v pieces always come in for a hammering Matty but I may give it a few extra coats of laquer just to be sure, good call.
viper_biker
Moderators
Moderators
Posts: 1798
Joined: Sun Apr 06, 2008 11:25 am
Bike owned: VFR400RR, CBR1000RR6
Location: Belfast, Norn Iron
Contact:
Re: bought some chinese fairings for me vfr

Post by viper_biker »

My tip for the V-piece is to fit some of the clear film or a colour matched vinyl. That'll help stop it flaking.
Ducati 916, not worth a carrott
hipringle
NWAA Supporter
NWAA Supporter
Posts: 214
Joined: Tue Apr 29, 2008 8:50 pm
Bike owned: 954 blade,
Location: west allotment, tyne & wear.
Re: bought some chinese fairings for me vfr

Post by hipringle »

cheers Gareth

Post Reply