Hi All

I need a photograph from all you GK76A owners..

i know there are 3 different types of CDI for these bikes, the CDI on my bike is some generic one and the previous owner had cut off the block connectors from the loom to get it on!

what i'm after is photographs of the two block connectors with the wires from your loom going into them so i can work out which colour wire is which pin on a new CDI unit.

unless someone has a pinout diagram!

any help would be GREATLY appreciated!

thanks in advance

Ben

Your in luck - I have the tank and seat off mine right now - gimme a hour or so and Ill whip the seat unit off and get your some close ups.

sweet.. thanks! :D

Latest blog post has them.

Let me know soonish if you need anything else, as I am putting it all back togther over the next day or so!

http://www.stoof.co.uk" onclick="window.open(this.href);return false;

Thanks gavsta! great help.. my chinese copy CDI arrived today, hopefully the bike will be running by weekend! :D

Good luck Ripzay!

Let us know how you get on.

Just a quick update: my chinese CDI worked - but the pins on it werent the same as your pictures (despite the connection blocks being the same shape!.. they were in a completely random order so it took me ages to work out which wire went where.

so - it works! it runs sweet when its moving but idles a tad roughly so the carbs need a clean.

Thanks for all your help. and thanks to the chinese :D