Hello guys!

I have a leaking exhaust header on the VFR, it's at the joint on the headers that run below the engine.
It's a hole that's been punched through it.

Any systems thats worth buying or is it all looks? Maybe someone has a good set of originals? :)

Kind regards, Lasse

if it at the bottom where you dont see it just wrap a can around it with some fiberglass wrapping and some lockwire to hold it shall do that trick nice and quickly :) :) or weld it up

or take your system off and take it to someone who will weld on some stainless collars in piece of the old mild steel ones,most cost £60,refit exhaust and enjoy

or sell the old rotting one you have (good luck as everyone has at least one rotting one) and spend £200+ for a half system that you might need to find a can etc for ....

i'd got for option one