might not be in the right section but im after the 1"ish long little metal rod that goes thru the rubber bit on my rear brake caliper. had pulled it apart and painted weeks ago and went to put on and its missing. so if anyones got a caliper they use for parts would be helpful, sorry no pic as i didnt have my camera on me when i was out at my bike, which is an NC29. its not any of the bolts think its where the caliper "floats" and it rocks back and forth.
will post pick if people are struggling to understand my random description.

you can buy them new from honda £5-10. i replace my brake bolts every 2 years. esp the ones that hold the pads in.

http://i18.photobucket.com/albums/b145/ ... e_pads.gif" onclick="window.open(this.href);return false;

link above is the fiche to the rear NC29 Brakes. find the pin bolt/number then look down the list for the honda part number.

or email GF as i am sure he has loads kicking about!

its no 17 if anyone has one, will contact GF tho
(had trouble uploading the pic, something about "Your images may only be up to 768 pixels high.")

£4 for a used one delivered 1st class post - we have plenty.

Paypal is easiest as per email below.

(had trouble uploading the pic, something about "Your images may only be up to 768 pixels high.")

thats why i had to just link it instead. if you try to re-size some of the fiches i have they go all weird and unreadable!