To remove the dogbone linkage on the nc 30 will I need to take off the exhaust too
I just want to know what is involved before I start

Thanks

Pete

yep ,found the system had to be removed to get the bolts out of the linkages or else they hit the pipework and don't clear the linkages.
it's never as easy and straight forward as you'd hope is it !!!

With a standard exhaust system i didn't need to remove the exhaust system to take out the dogbone linkage/bolts. With a yamamoto exhaust i had to remove the exhaust to get the dogbone bolts out.

thanks got standard system so will try and get them out with it on first

cheers
pete