Anyone know if there are any identifying marks on the Honda clutch springs? I have Ebc ones in the bike and they're a bit stronger than I'd like. I want to swap out one or two ebc ones for original ones to hopefully make life easier. Cheers.

I wouldn't recommend having springs of different tensions, it could lead to uneven wear.

slug675 wrote: Sun Oct 23, 2022 11:24 am Anyone know if there are any identifying marks on the Honda clutch springs? I have Ebc ones in the bike and they're a bit stronger than I'd like. I want to swap out one or two ebc ones for original ones to hopefully make life easier. Cheers.

A common mod was to add an extra spring - to ensure no slippage of the clutch. Could it be that you might want to lubricate yuor cable and allow an easier action that way?

There are no marks on the OEM springs as I have one in front of me. Standard fitment is 3 springs. You can probably mix and match OEM and EBC if you wish to?

Thanks for the replies. I remember the old mod of adding an extra spring. I have another set of springs but without any markings the only way to find out how strong they are is to fit them i guess. Cheers.