NC30 front head leaking coolant.
Posted: Wed Jul 22, 2020 9:07 am
Hi
I've got an NC30, bought for a restoration.
The bike is complete, however on initial fire up (it had been parked up for 3+ years prior to purchase), a coolant leak appeared from around the right side front head engine mount lug. Close inspection shows someone has tried to repair it by brazing.
I realise now, this is not uncommon.
However I'm not clear on what this takes to remedy.
I really don't want to remove/replace the head.
Any suggestions would be greatfully recieved.
B
I've got an NC30, bought for a restoration.
The bike is complete, however on initial fire up (it had been parked up for 3+ years prior to purchase), a coolant leak appeared from around the right side front head engine mount lug. Close inspection shows someone has tried to repair it by brazing.
I realise now, this is not uncommon.
However I'm not clear on what this takes to remedy.
I really don't want to remove/replace the head.
Any suggestions would be greatfully recieved.
B