Can anyone remember the allen key size required to undo the main swingarm bolt that goes through the frame?

I have removed the nut on the LHS and the castellated nut on the RHS, but the bolt head seems to have two allen sizes and the smaller one (which I assume is the one used for removal) seems to be 11mm which is quite an odd size.

Any ideas welcome!

Cheers

think it might be 14mm off the top of my head

Can't remember the size but as 'allen' keys that size are rare I got one from halfords, look for the drain plug adapters.

Druid

after you know the size go to http://www.toolshopdirect.co.uk" onclick="window.open(this.href);return false; type it in the search and find the cheapest or the bargain one and job done......


william

I can confirm that it IS a 14mm allen head as I swapped swingarms a few days ago.

Thanks guys,

I will be getting one tomorrow.