Hello all, espesially NC29 owners :)
I have CB-1 with NC29 swingarm.
At the moment I am perfroming linkage upgrade: I want to install progressive linkage from NC29.

Can someone explain or make a photo of linkage (number 12 on a picture) position with a hanged out rear wheel?



I want to undestand the position of low shock linkage when swigarm is in the lowest position.

Thanks in advance.

The best option for me will be to get this two dimensions with a hanged out rear wheel:

Sorry i cant help you as i have not got those parts easily accessible. I hope someone has their bike apart and can give you the dimensions you need.

Davez29 wrote:Sorry i cant help you as i have not got those parts easily accessible. I hope someone has their bike apart and can give you the dimensions you need.

Hi! Thanks for response anyway! :)

Dimensions is a best option. At least photo will be very helpfull.
It can be a photo of shock's lower bolt position regarding to the hole in swingarm.

I have also realized that actually there is no need for 2 dimensions.
It will be enough to measure this:



The only important moment is hanged out wheel. Swingarm should take it's lowest position and shock should be fully released.