Hi all

Having some issues with my NC35

When the bike has been standing for a night of a few days i have a massive mission to get her started and if i do get her going she battles to idle and rev up.

Ive run out of options please help

MAV

Sent from my SM-N910F using Tapatalk

Starts easy once warm?

Carbs balanced, valves clearances checked?

Most of the time yes...valve and carbies are fine when she is still a bit coldish when you pop the the throttle revs drop and she dies

Sent from my SM-N910F using Tapatalk

They all need some warmup from cold.

Choke and vacuum tap working correctly.

Personally found that converting vacuum fuel tap to fully manual improved the startup if the bike had not been used for a few day. Think fuel evaporation and slow float bowl refill, as consequence of limited vacuum during cranking, may have been the issue.

Mag your manual tap from what bike is that or how did you convert it

Sent from my SM-N910F using Tapatalk

Used the guide in the HRC TT formula 3 setup doc from this site library. Rearranged the tap internals using the spring to keep diaphragm open and plugged the vacuum hose from the intake. Apologies for the lack of clarity, been a while since I did it.

Awesome thanx

Sent from my SM-N910F using Tapatalk

Magg can you send me link please

Sent from my SM-N910F using Tapatalk