Page 1 of 2
Windscreen for 1WG 3EN1?
Posted: Tue Apr 05, 2016 6:19 pm
by heavymetalmullet
Hi guys and girls, making some good progress with the FZR last few weeks. Installed a working set of carbs with new carb joints and have overhauled the front brake lines with some nice new Venhill braided lines.
My bike currently has no windscreen at all so I was wondering if anyone could suggest where I can get one for this model? I've found a very cheap looking one on fleabay from China that's in dark smoke, although I would prefer one in light smoke from the UK ideally. Tried looking on all the usual sites, sportsbikeshop, M&P, motorcycleproducts.co.uk, wemoto and cmsnl but no joy at all. Can anyone help?
Re: Windscreen for 1WG 3EN1?
Posted: Tue Apr 05, 2016 10:19 pm
by Evilchicken0
Skidmarkz should be able to help :)
Re: Windscreen for 1WG 3EN1?
Posted: Wed Apr 06, 2016 7:41 pm
by heavymetalmullet
Evilchicken0 wrote:Skidmarkz should be able to help :)
Superb, thank you. Can't find one on there for that specific model, do you think the Genesis model would fit mine?
Re: Windscreen for 1WG 3EN1?
Posted: Wed Apr 06, 2016 8:47 pm
by Evilchicken0
Ring them up the might do it but not advertise.
Or try Powerbronze, I had one for a 3en2 but it was wrong so maybe it was 1988 one.
Look at the FZR600 3he look at the different top fairings and find one like yours (air tubes above the lights) note the year and order one of those. The 3he use the same fairing as yours and can be useful for spares
Re: Windscreen for 1WG 3EN1?
Posted: Wed Apr 06, 2016 9:13 pm
by heavymetalmullet
Evilchicken0 wrote:Ring them up the might do it but not advertise.
Or try Powerbronze, I had one for a 3en2 but it was wrong so maybe it was 1988 one.
Look at the FZR600 3he look at the different top fairings and find one like yours (air tubes above the lights) note the year and order one of those. The 3he use the same fairing as yours and can be useful for spares
All good ideas, thanks again for your help Evil Chicken, you are always so helpful on here. Very much appreciated dude!
Re: Windscreen for 1WG 3EN1?
Posted: Wed Apr 06, 2016 10:41 pm
by Evilchicken0
Niet problemski
Let us know how it goes
Re: Windscreen for 1WG 3EN1?
Posted: Thu Apr 07, 2016 9:22 am
by willandrip
Some observations on Fzr 400 (PRE 3TJ ) screens.
The Genesis and 2TK screens are identical and fit each bike.
The 3EN1 and Fzr 600 3HE screens...as above.
The 3EN2 screen is model specific.
There are 2 UK sellers on Ebay retailing aftermarket screens ....one prices screens at circa £54.99...the other
at £29.99......they are both the exact same quality and thickness and are certainly no better than the £13.00 units
from Asia when available.
The biggest problem is identifying which screen the vendor sells !
Re: Windscreen for 1WG 3EN1?
Posted: Thu Apr 07, 2016 1:23 pm
by Evilchicken0
Are you saying Genesis fits 3en1 ?
Re: Windscreen for 1WG 3EN1?
Posted: Thu Apr 07, 2016 3:31 pm
by willandrip
No Boris ...Genesis fits 2TK and 2TK fits Genesis.
3EN1 fits 3HE and 3HE fits 3EN1
The "as above" referred to 3EN1 fitting the 600 and the 600 fitting the 3EN1 as you previously stated.
Re: Windscreen for 1WG 3EN1?
Posted: Thu Apr 07, 2016 5:49 pm
by Evilchicken0
Just making sure, in case somebody only reads the one post ... and you know they will