I'm about to rebuild the front and rear callipers on my 94 L reg NC30.
If anyone has bought any recently could you let me know where from please?
I'll also need the very small seals that seal the two callipers together.

I've found these listings on Ebay.....

http://www.ebay.co.uk/itm/FRONT-caliper ... 3641.l6368

This set looks perfect, any thoughts?

http://www.ebay.co.uk/itm/Honda-VFR400- ... SwiCRUhuB8


Thanks in advance.

Cheers,
Dave.

Rick Oliver is your man.

His stocklist with his contact details are at the top of the V4 general section

I have emailed Rick but had no answer for a month or so.
I'll try again.

GasMan307 wrote:I have emailed Rick but had no answer for a month or so.
I'll try again.

call him

I got some individual seals from Rick and a proper Honda set from David Silvers which come with the little o rings for joining the caliper halves, think you're looking at £25 per caliper.
Also ordered some from e.bay which I had to send back as they sent me RFV seals and don't recognise that VFR calipers are different.
Go with Dave Silvers: https://www.davidsilverspares.co.uk/VFR ... rt_150877/
Or give Rick a call one evening
Proper parts, will fit, won't fail after a while and they send out next day.
Don't buy cheap stuff pattern seals from e.bay.

Cheers fellas, will call both and enquire.