I've just purchased a 1990 NC30 with a stock exhaust system.
I would like to replace the stock silencer, but it is complete with the exhaust pipes.
I'm apprehensive to cut this off if I can't find a suitable slip-on that will fit the cut exhaust pipe.
I assume slip-ons for this model will come with the appropriate link pipe.
Can anybody recommend one that they have successfully installed?
Thanks

You can buy a "can adapter" to suit the pipe work but my advice would be to keep the uncut system (if it is in good condition) and buy a half system and can for the proper experiemce...

You can get cut NC30 systems for not a lot


Welcome to the site - go have a read of the exhaust thread :)