Does anyone have any tips or the best method to polish the yokes? I've just removed mine and they've previously had one of those naff carbon stickers attached. I've cleaned all the glue off so is it just a case of getting stuck in with a wire brush attached to a dremel?

Ta!

i used different grades of wet and dry starting from course to very fine. Took a while to complete but worth the effort.

Google wet and dry polishing to get some tips

Dremals are really handy for polishing stuff like yokes with awkward places, I did mine with sandpaper to start with to flatten off the casting marks the used the dermal.
Cheers
Ian