Page 1 of 1
NC30 Rev Counter lights not working
Posted: Sun Aug 18, 2013 4:43 pm
by tigerclaw
Hi Guys, editted my post, got the rev counter working (earth wire was the issue) but it has no backlight in it. Do they have backlights, how many and do I need to open it to replace them? (I see the speedometer has a redish glow going on... Not sure if that is the standard colour) - thanks
Re: NC30 Rev Counter lights not working
Posted: Mon Aug 19, 2013 4:38 am
by mentalist
sounds like the bulbs have gone, two if i remember rightly, no need to strip the clocks down, they are push fit from the rear.
Re: NC30 Rev Counter lights not working
Posted: Mon Aug 19, 2013 11:37 am
by tigerclaw
Thanks man....
Re: NC30 Rev Counter lights not working
Posted: Sun Sep 22, 2013 8:53 pm
by tigerclaw
I am swopping out the bulbs, I see my bike has a mix of 1.7 w bulbs (one is fried) and 1.2 w bulbs. The 1.7 w bulbs seem to be the right thing per the parts catgalogue... Is 1.7 correct or is there any wisdom / good explanation for the 1.2 w bulbs I have in the bike?
Re: NC30 Rev Counter lights not working
Posted: Sun Sep 22, 2013 10:50 pm
by ireson75
Re: NC30 Rev Counter lights not working
Posted: Mon Sep 23, 2013 2:03 am
by magg
1.7W is the correct value, haynes and OEM part list, although I just use the Honda P/N 34908-MG9-951.