Can anyone recommend me a place to get one ?

Im based in Sheffield or an online place

Many thanks in advance Simon

Just need a bolt m20 cant remember the pitch but im sure if you search itll come up

You dont use one on the NC30.

After removing the 14mm bolt on the flywheel you will see a bigger hole.

Use an M20 x 1.5 mm bolt in that and it pops the flywheel off.

Possible stupid question but where do I find a 20mm bolt?

Same thing you are using right now, internet

Simon.J.Crossley wrote:Possible stupid question but where do I find a 20mm bolt?

Bolt and fastner shop?

Yellow pages under Fastners.

Rick Oliver sells them too

just got myself one from ebay http://www.ebay.com.au/itm/160869693300 ... 1497.l2649 worked a treat easy as to get off , i used an air compressor & rattle gun though

The Bolt Rick oliver sells is about 1gbp, so 2 aud or so.

Last bolt I bought was about 75p I think