Hi all!
I have just received a Viper race can with the appropriate link kit from wemoto.com.
I'm now in the process of fitting it, but it makes no sense at all how it is suppose to go together....!
I have not been able to find a manual online, and none was supplied with the kit.
If anyone have experience with this sort of thing, please do share as I'm at the end of my rope with this project.

Anders.

So..what exhaust is on there now?

it is pretty simple if you stand back ad have a look at it.

I'm guessing you have a standard system and you are wondering how to go about chopping the can off... my advice - don't chop it off, if that compelte system is in good order it can be worth decent money.

So buy an already chopped system that you can then use the adapter and can.

I hope you did not pay more than £100 for that can...you can buy Japanese systems for not a lot more than that.


Anyways - welcome to the site. Have a browse about - especially go and see the exhaust thread in the V4 section. Am sure that will give you the ideas about what to do..

Ah, I now see that the original system is a one-piece deal. That means that someone has cut mine already so I will have to fit things a little differently then......
I thought I had the original system on.....
Thanks for the quick reply.!

Anders.

All good then - if it has already been cut, you should be able to take off the old can, slip the new one on...job jobbed!

I'd still have a mooch about though, this is the place to be for the V4!

Absolutely. I have been on the forums for about a year now, but have never had a reason to ask for anything due to all the great posts already made here. Every time I run in to a problem, I always look to the forums for answers, but this time I couldn't really find anything. :-)