Page 1 of 1
					
				fzr 3en charging
				Posted: Fri May 10, 2013 9:43 pm
				by rrsp
				does any body know what ohms reading there should be on the stator windings as bike isnt charging ? getting 0.6 ohms on all 3 wires is this correct ?
			 
			
					
				Re: fzr 3en charging
				Posted: Sat May 11, 2013 12:16 am
				by Morespeedvicar
				Hi, i can have a look at mine tomorow if i remember, it in bits so should be ok. Are there any shorts to ground on the three stator wires?
Its prob the reg/rec thats at fault, the one on mine went last year.
Cheers
Ian
			 
			
					
				Re: fzr 3en charging
				Posted: Sat May 11, 2013 6:24 am
				by rrsp
				i put another regulator on from a breakers,was told it was tested ok.but still the same, not charging.ie battery does not charge when running. ?
			 
			
					
				Re: fzr 3en charging
				Posted: Sun May 12, 2013 3:16 am
				by Clanky
				Have a look through this thread on another forum:
http://www.fzrarchives.com/ipb/index.ph ... 52573&st=0
The guy with the user name DonTZ125 knows his stuff so look for his comments in particular.
 
			
					
				Re: fzr 3en charging
				Posted: Wed May 15, 2013 12:27 am
				by Morespeedvicar
				Hi, really sorry about the delay, i'm getting about 0.7 ohms on mine to the three generator wires, i was gonna get the running disconected voltages for you aswell but not had time, i'll have a go tomorow if it stops raining.
Cheers
Ian
			 
			
					
				Re: fzr 3en charging
				Posted: Fri May 31, 2013 10:00 pm
				by rrsp
				fixed hairline crack in a fuse, kin nightmare ! 
