Fireblade TJ
Posted: Mon Apr 08, 2013 9:51 pm
Heres my new project, 3TJ/ Fireblade 919cc.
Looks good so far. Keep the pics coming.
http://www.400greybike.com/forum/
Fireblade TJ
Page 1 of 1
Re: Fireblade TJ
Posted: Tue Apr 09, 2013 5:27 am
None but the brave.
Looks good so far. Keep the pics coming.
Looks good so far. Keep the pics coming.
Re: Fireblade TJ
Posted: Tue Apr 09, 2013 9:14 am
I've been following it a bit on the PB Forum - it's a lovely machine
Re: Fireblade TJ
Posted: Fri Apr 12, 2013 9:08 pm
think you will need the chasis braced up a bit around headstock area ! !! !
Re: Fireblade TJ
Posted: Sat Apr 13, 2013 10:31 am
Apparently not - the guy who built the Aussie one hasn't braced his and its fine.
Re: Fireblade TJ
Posted: Wed Apr 17, 2013 6:59 pm
The 3tj was over engineered for a 400 anyway. Look at the frames on new sports bikes and compare it to the 3tj.
Re: Fireblade TJ
Posted: Fri Apr 19, 2013 1:40 pm
was pics of one on the forum a wile ago, looks a bit of a beastie
viewtopic.php?f=36&t=11295
track use only though,
you thinking of putting this on the road bendy? it'll be an animal
viewtopic.php?f=36&t=11295
track use only though,
you thinking of putting this on the road bendy? it'll be an animal
Re: Fireblade TJ
Posted: Fri Apr 19, 2013 6:38 pm
That bike is the 1 built in OZ, was going to put it on road but I'm now only running an 8 litre tank, should be enough for a track session. The 39mm fcr's take up a lot of space. Can't get 3tj tank on so using a fibreglass cover moulded from a 3tj tank.