NC30 OEM Spring.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
StrayAlien
- Familiar Member
- Posts: 361
- Joined: Sun Jan 15, 2012 9:27 am
- Bike owned: NC30, Dukes, Hog
- Location: Melbourne, Straya
NC30 OEM Spring.
Hey, just curious. What spring did the NC30 ship with?
After some Nitron new-shock woes (another thread on this forum), weirdly, I bumped into Dave Moss at a track (in Australia!) on Saturday. He knows a thing or two about 400s.
He said his race bike uses a 1400 - stock linkage shortened by 2mm. Yes, correct 1400. He says the starting point is 1100, but normally nothing less than a 1200.
?
After some Nitron new-shock woes (another thread on this forum), weirdly, I bumped into Dave Moss at a track (in Australia!) on Saturday. He knows a thing or two about 400s.
He said his race bike uses a 1400 - stock linkage shortened by 2mm. Yes, correct 1400. He says the starting point is 1100, but normally nothing less than a 1200.
?
-
CRM
- Admin NWAA
- Posts: 2972
- Joined: Sat Apr 05, 2008 2:06 pm
- Location: NorthWest
- Contact:
-
999Gomerz
- Settled in member
- Posts: 150
- Joined: Mon May 09, 2011 12:27 am
- Bike owned: Hondas, Ducati, Suzuki, Vespa
- Location: Melbourne, Australia
Re: NC30 OEM Spring.
Did he mention how long the shock he uses is?
-
StrayAlien
- Familiar Member
- Posts: 361
- Joined: Sun Jan 15, 2012 9:27 am
- Bike owned: NC30, Dukes, Hog
- Location: Melbourne, Straya
Re: NC30 OEM Spring.
He wasn't sure but thought that it might be near stock. At any rate he thought an 8mm shorter pull arm length, like i have, was excessive.