I have an Nc24 that has been sitting in my garden for over a year with no cover on it. My brother and i are going to take the motor out of it and strip it down to check for water damage on the internals (Which i'm hoping i will be lucky and find none), i'm also going to clean up the block and re-paint it. i have searched everywhere for a manual for her but can't find one is the nc30 engine manual the same spec for tourque settings, timing settings, I know by reading some of your earlier posts that the motor has old fassion tappets it would be great if anybody had the settings for these as well please. I would be grateful if anybody can help me with this problem please ?

NC30 engine is completely different but the same if you get what I mean. Firing revolution is different for a start. Torque figures should be pretty much the same though.

If you want an NC24 manual, you'll need to look at Japan for one and take a course in Japanese.

Or you could use these! :D

http://members.multimania.co.uk/stevejb ... anual.html

That's just the specifications (taken from the back of the Haynes manual)

Theres also mistakes in there..