Hi

My indicator switch is playing up. When i turn the left indicator on, the switch is firstly very stiff, and secondly turns on the main beam briefly. But It doesnt do it all the time.

Any suggestions please?

Note i am not great at mechanics, but will give anything a go.
If its something best left to a garage please let me know. I dont want to damage her!!!

Crusty!

The simplest thing to try would be good ole squirt of WD40 using the straw into all open bits on the switch while working the switches about. Wrap a rag around the switchgear to help stop over flow and to mop up any excess.