this is a VFR750 rear wheel but held on a standard nc30 hub, i think.

Found it in this thread

viewtopic.php?f=22&t=14344

any pointers??

Modified wheel to make single hole for nut.
Seen a couple of these about lately.

I thought the locating hole in the wheel was the same diameter, but the stub axle was too short to allow you to just put the vfr750 rear on, and a vfr750 hub doesn't/won't fit?

If its just a case of milling out the centre locating hole in the vfr750 wheel, well that seems pretty simple!

Cannot remember off the top of my head who bought that bike..but they were on here...based up in the NE...

It is a fecking doozy..

Nut sure about the axle but i wouldnt have thought the wheel was any wider at the mounting point.
If it was the 750 hub they would just use the 4 bolt holes surely?

Also just seen this on Rick olivers price list.

NC30/35 VFR750 rear wheel conversion £125 exchange
(modified axle complete with studs & nuts + 5mm chain spacer kit)

Yeah yeah I know that you can buy the exchange kit from rick, and it's quality kit, but if I can mount the vfr750 wheel rvf400 wheel and vfr400 wheel on the same stub axle hub assembly then that'd be really useful, tho I doubt it's possible, but I'm still intrested to know how it works!

"Nut sure about the axle" haah that's a great unintentional pun!

cmsmj1 I think the remains of it are with bean from off here, I might be wrong, but yeah that bike is pretty fooking epic!

have a word with colin aka forceV4 on here, he has a 750 wheel for sale with the conversion for the 30 hub i believe

https://fbcdn-sphotos-b-a.akamaihd.net/ ... 2722_n.jpg

https://www.facebook.com/photo.php?fbid ... =1&theater

Where there is a will there is a way my friend!

Sorry i miss typed xD


That wheel with the 4 holes filled in just looks plain odd!

Hmmm sounds like it needs a converted axle, so dunno if you'd be able to take the vfr750 wheel off and bolt the rvf/vfr wheel straight on without changing out the axle!