Page 1 of 1
misfire and no power above 5k rpm nc23
Posted: Sun Sep 02, 2012 10:51 am
by willpisme
hi, my nc23 is misfiring above 5k and has no power. I bypassed the fuel pump and ran a direct gravity feed which sorted it for a few miles but the problem has returned. The tank is also completly full and i have fitted a new battery. Plugs are all new and a good colour and sparking. Its a very intermitent problem and im completly lost on what it could be???!
Re: misfire and no power above 5k rpm nc23
Posted: Sun Sep 02, 2012 1:06 pm
by tanuki
Its your speed restriction kicking in, check your connections behind the clocks and give them all a good clean.
Re: misfire and no power above 5k rpm nc23
Posted: Sun Sep 02, 2012 5:41 pm
by willpisme
I meant to mention i had a gold CDI as well so no restriction. Turns out it was a dodgey HT lead on no 3 cylinder. runs like a dream now!
thanks for the advice mate