Bandit Question! Please read
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 5
- Joined: Tue Aug 21, 2012 6:38 pm
Bandit Question! Please read
Hello are the Bandit CDIs interchangeable, will a 600 fit a 400, and does VTEC engine make a difference (my guess is the advance curve is slightly different
-
- Settled in member
- Posts: 9
- Joined: Wed Aug 01, 2012 11:43 pm
- Bike owned: Tuono 1000, 900 Monster
Re: Bandit Question! Please read
I doubt that they are interchangeable mate, even less chance with the vv ones.
-
- Settled in member
- Posts: 5
- Joined: Tue Aug 21, 2012 6:38 pm
Re: Bandit Question! Please read
Hello thank you for your response, the one I have here is not the VTEC engine, Paul @ Wrentham Bike Shed is telling me the same thing though, different advance curves is most probable, if anyone has tried it please let us know!
- Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Bandit Question! Please read
I would be surprised if a 600 cdi would fit, even pre and post 1993 are different on the 400.
The VVC is totally having a single 12 pin connector, the cdi runs TPS and an oil pump for the VVC.
The VVC is totally having a single 12 pin connector, the cdi runs TPS and an oil pump for the VVC.
-
- Settled in member
- Posts: 5
- Joined: Tue Aug 21, 2012 6:38 pm
Re: Bandit Question! Please read
Thanks for your response, also had an owner of the VTEC confirm what you have said today, hope I can find one soon