Hi Guys,

I'm building a GK76a from boxes, but cannot figure out how the coils mount under the tank.

Would anyone have a picture of the area under the headstock?
Or could someone take such a picture?

Here's hoping!

Alex.

No picture but they fit side by side right up against the head stock, real pain to get to as they are behind the thermostate.

Stick coils - you know you want to

Variablevalves suck wrote:No picture but they fit side by side right up against the head stock, real pain to get to as they are behind the thermostate.

I can see where they go, I just can't picture HOW they go there! I don't know if we are missing a bracket or some other attachment mechanism.

thunderace wrote:Stick coils - you know you want to

That may be the next step (or for my FZR hybrid... ) but this bike will be standard to start with, it's just easier!

Alex.

Alex. wrote: I can see where they go, I just can't picture HOW they go there! I don't know if we are missing a bracket or some other attachment mechanism.

the plug connectors for the switch gears and ignition goes right behind the headstock and all 3 connectors are on a bracket witch the bolts for the coils go through

if that makes any scene :/

Marsbar wrote:the plug connectors for the switch gears and ignition goes right behind the headstock and all 3 connectors are on a bracket witch the bolts for the coils go through

if that makes any scene :/

Ah, I understand what you are saying and it does make sense. I'll have to have a closer look and see what spacers are needed and how it fits together, I think I may have the connector bracket upside down...

Alex.

Figure 30 part number 20 on the Parts manual in the link in the manual section. even though it does look upside down in the pic :/

link for quickness: http://www.graniterock.co.uk/400manuals ... _GK76A.pdf