Evening all, please can someone confirm the correct attachment of the throttle cables onto the carb pulley? Specifically the bottom cable with 2 nuts on the thread, the Haynes Manual photo is useless as I cant make out what its actually showing, and I didnt take a photo of it prior to taking the carbs off... school boy error!

Is it this:


or this:

From memory I think it's the first

Actually - I'm not sure if it shouldn't be just the one nut on the lower cable as on upper cable, or possibly more likely you are missing a locknut on the upper cable.

It's the secont.The two nut are there to adjust the freeplay.

pns wrote:It's the secont.The two nut are there to adjust the freeplay.

Second pic