Page 1 of 1
					
				400/600 converion no spark
				Posted: Wed Jun 20, 2012 12:51 pm
				by iancullen7
				HI not getting spark off either coil pack any ideas? tried 3he coil pack just plugged  in with spark plug in touching frame, still no spark  

  99%done
 
			
					
				Re: 400/600 converion no spark
				Posted: Wed Jun 20, 2012 3:08 pm
				by Evilchicken0
				Have you plugged in the generator ??? The pickup is under the gennycasing and it senses the flywheel, if that's not plugged in then there's no signal to the cdi.
			 
			
					
				Re: 400/600 converion no spark
				Posted: Wed Jun 20, 2012 5:24 pm
				by iancullen7
				all connectors seem to be plugged in got no loose ends, me thinks i need a friend with a volt meter 

 
			
					
				Re: 400/600 converion no spark
				Posted: Wed Jun 20, 2012 6:47 pm
				by Evilchicken0
				Check the pickup in the genny housing.
			 
			
					
				Re: 400/600 converion no spark
				Posted: Fri Jun 29, 2012 2:29 pm
				by iancullen7
				just put in the 400 cdi unit hey presto she lives