Hope someone can help, I'm after some decent base settings for my bike before it goes off to the dyno. First off it's an nc30 with a foam washable filter, vfr carbs with the drilled slides and raised needles, and an ethos half system with freshly bead blasted standard headers. Otherwise standard. Any help appreciated, I assume I'll need to contact Rick Oliver to get the correct jets, cheers Paul.

You will be looking at the classic 118 F and 120 R setup mate.

As long as your airbox is standard too..

rised needles and drilled slides will make it very rich low down,maybe you could lower the needles back to stock 0.5mm and 118/120 jets for a good fair start.
i'd be very interested to hear the out come but.