On my NC30 it has a little play in the gear selector footpeg, ive took the rearset off and checked it out then tightened the 14mm bolt in the back of the footpeg and the peg is now solid and secure, but the gear selector arm still has play in it, is there some sort of bush/shim that should be on the face of the selector? Something thats missing? Could i put something in there like a washer to stop it wobbling? If so what size lol please help, thanks in advance

Its normal mine wobbles its due to the linkage.

It probably needs a touch of slop - you need to be spending big bucks to get some with bearings in otherwise!

CMSMJ1 wrote:It probably needs a touch of slop - you need to be spending big bucks to get some with bearings in otherwise!

ok thankyou mate, ill probably just leave it as it is hen lol

A mate and I want to fit some very thin washers/shims to stop the free play. But where to get it ?

royster81 wrote:A mate and I want to fit some very thin washers/shims to stop the free play. But where to get it ?

Yeh interested too?

Did you try that zinc sheeting out yet?