Page 1 of 1
GK76A CDI Number
Posted: Sun Apr 22, 2012 9:21 pm
by super-thilde
Hi
I need a new CDI for my gk76a. My question is; Does every cdi have at different number or does all gk76a have the same? Mine has BB7241, and I found a one with BB7214. Can I move the BB 7214 to my bike and it would work?
/Mathilde
Re: GK76A CDI Number
Posted: Mon Apr 23, 2012 2:01 am
by rgvsp
For the standard GK76 (non-SP) two plug CDI, the parts manual is showing 4 different CDI's.
32900-33C10 1990 L model
" -33C70 91/92 M/N model
" -35D30 93 P model
" -35D31 94 S model
Those are part numbers not the BB numbers you are describing. But the part numbers are also on the CDI just above the BB number so you can cross check. Remember 93 on were restricted models.
Hope that helps a bit.
Re: GK76A CDI Number
Posted: Mon Apr 23, 2012 9:05 am
by super-thilde
Okay. Thx. I have a bit of a problem, my number is worn off, so cant read it. The only thing I have is the BB number. I need the one whit one plug and 12 pins - the SP model.
Re: GK76A CDI Number
Posted: Mon Apr 23, 2012 3:50 pm
by Variablevalves suck
Are you sure the old one is bad?
I posted resistance values for checking the SP unit.
They are rare and go for good money so check the old unit first.
Re: GK76A CDI Number
Posted: Mon Apr 23, 2012 10:11 pm
by super-thilde
Im sure, its dead

Re: GK76A CDI Number
Posted: Mon Apr 23, 2012 10:15 pm
by Variablevalves suck
I may have one, ive been moving stuff into my new garage so no idea where.
I will have a dig about!
Re: GK76A CDI Number
Posted: Tue Apr 24, 2012 7:17 am
by super-thilde
Thx. I thought of buying one from China, found one one ebay. But its so expensive. Im from Denmark, and we have the weirdest taxes, so it costs twice.
http://www.ebay.co.uk/itm/Derestrict-CD ... 415af4520e
Re: GK76A CDI Number
Posted: Tue Apr 24, 2012 2:44 pm
by Marsbar
Looks the same as this but a hell of alot cheaper...
http://www.aliexpress.com/store/105143/ ... cycle.html
i was thinking of buying it as i thought my CDI was dead also, but turned out i had mixed up a wire behind the clocks.
What makes you think it is the CDI?
P.S. the site may say its not secure but its safe its like amazon
Re: GK76A CDI Number
Posted: Wed Apr 25, 2012 8:32 am
by super-thilde
My bike can't start. My mechanic measured everything and there is nothing. Everything else is fine. Its only the box which is dead. It the same thing, usa is outside of eu, so it cost son much more in taxes. But still cheaper. Maybe i will buy that instead.
Re: GK76A CDI Number
Posted: Fri Sep 21, 2012 9:52 pm
by Gash
Here is a photo of a 1990, SP CDI if it is of any help.
