Exhaust advice please
Posted: Fri Nov 18, 2011 10:15 am
Hi all,
Finally got my nc23 road registered after going through all sorts of hassles with the Nsw roads and traffic
Authority because they don't recognize what the other states does in Australia.
Anyway, I bought an aftermarket muffler off a local seller that sourced his stuffs from china and noticed
That the diameter of the hole at the end where it bolts onto the header is 8mm smaller than that on the oem muffler. Please advice if this is a problem ?. Thanks .
Finally got my nc23 road registered after going through all sorts of hassles with the Nsw roads and traffic
Authority because they don't recognize what the other states does in Australia.
Anyway, I bought an aftermarket muffler off a local seller that sourced his stuffs from china and noticed
That the diameter of the hole at the end where it bolts onto the header is 8mm smaller than that on the oem muffler. Please advice if this is a problem ?. Thanks .