Morning all,

Is anyone aware if i will be able to fit an NC30 front fairing, headlights, etc. to an NC35 frame using an NC30 clock bracket?

Cheers, Simon

You'll need the nc35 clock bracket.

Ok cheers,

Any idea on headlight fitting or will i need to get fabricating?

Cammo wrote:You'll need the nc35 clock bracket.

dont you mean nc30 clock bracket?

You will need NC30 clock bracket and screen bracket but screen bracket will need modding as the 2 frames have different mount points.

Cheers for that.

just curious, but why'd ya want to do that?

porndoguk wrote:

Cammo wrote:You'll need the nc35 clock bracket.

dont you mean nc30 clock bracket?

Yeah my bad.

Good question!

I'm converting my NC30 track bike back into a road legal machine. Initially I was going to use NC30 running gear as I want to build an RC30 replica, I have been talked into using NC35 chassis components as the basis for the project by GF so it will now be a kind of 'best of both'.

The spec should hopefully end up something like this:-

NC35 Frame, swingarm, forks(GF Internals)/yokes & subframe
WP Shock
NC30 front wheel/NC35 back wheel
NC35 brakes with EBC race discs
NC30 Engine running HRC kitted NC35 carbs and ANR ram-air
Moriwaki twin-stack exhaust
HRC NC30 engine breather setup
NC35 Single Seat
NC30 tank and front fairing, headlights, clocks, etc.
Carbon NC35 front mudguard

All painted up in RC30 colours, not decided on white or gold wheels yet though!

Cheers, Simon

ah okay, fair enough!

sonnds good!