I'm hoping that somebody here can help me.

I am over in the U.S. with a 1994 RVF400 and I need to find a replacement blinker switch assembly. I would prefer to get a new one if possible - but I would go with a used one if that is all that is available.

I have found a few possible sources - and gotten a quote from David Silver on a new one (which would take until September to arrive ), so I am wondering if there is some way I can look up what the parts interchange is for this between the RVF and other Honda models.

The part number I have found for the RVF is:

35200-MR8-900

Which from what I can dig up is the same part on the RVF400 and the VFR400.

There must be some other Honda models of similar vintage that used the same part or a compatible part - maybe even one that I could find over here in the US more readily available.

Any ideas?

What about lings honda?

http://www.lings.com/lingscentralapp_co ... WoQk223360

Search the part number here or you could try CMSL

http://www.cmsnl.com/

Again just search the part number.

Failing that try ebay for a used one

as far as i'm aware of, its not interchangeable with any other Honda bike this includes the VFR400 (the RVF has different connector plugs to the VFR)

Could try Pm geoff33, i bet he has one

I have one in good condition, PM me if interested.

can rvf400 use any other bike clutch plate?...bcoz its rather hard to find 400's spares these days....ebay took long time to arrive and i need to use my bike a.s.a.p.....my clutch plates has start slipping at 6000rpm until 6500rpm, then ok all the way to 11000rpm but suddenly above that rpm and speed around 170km/h it start to slip...

...please help....thanks

you can use nc30 plates

mo haggs wrote:you can use nc30 plates

other than 400cc bikes.....can i use for example cbr600f clutch plates?....or any other bikes except 400's

EBC make clutch plates for the 400s - why can you not get some of them?

CMSMJ1 wrote:EBC make clutch plates for the 400s - why can you not get some of them?

becoz i'm in malaysia.......i don't think we have EBC spare parts here...600's and 1000's are more dominant in malaysia...