Can someone with an nc30 (preferably type N in white/red with a tiny bit of blue where the mid fairing meets the top fairing like this http://img.photobucket.com/albums/v382/ ... NC30_3.jpg" onclick="window.open(this.href);return false;) measure the big 'HONDA' on the belly pan... im looking at getting a couple of stickers made up for mine as whoever put the current ones on used ones that are too small

So if someone could tell me the exact measurement of the logo to the very extremities of each character i'd be very grateful :D Cheers!

Matt

I got mine from Image works and they are pretty healthily sized. If you wanted bigger..then get some from an RC30

http://i100.photobucket.com/albums/m38/ ... ainted.jpg" onclick="window.open(this.href);return false;

on the bike

http://i100.photobucket.com/albums/m38/ ... CF1572.jpg" onclick="window.open(this.href);return false;

Cheap too... :D

Taken from a brand new OEM panel it is 450mm long and 50mm high.
If you get a good match could you let me know where from as I need the same "HONDA" letters?

Having re-read your post, are you after the size of each individual letter?
If so, then let me know and I will dig it out and re-measure.

Tony

Cheers Tony, ive emailed the guys at imageworks asking for prices for pretty much all the stickers, so cheers for that CMSMJ1! They claim to have an extensive archive of bike decals so ive aksed them for prices.. if they come back reasonable then ill get the lot and pimp my ride :D Cheers for the measurements though, i can email them and confirm theyll get it spot on so ill let you know what they come out like! Whatever it is, its gotta be better than the price from honda, they quoted me £25 plus VAT... PER SIDE!!!! so £60 nearly for the pair!!!!!

Excellent!
I will keep my eye on this thread.

Don`t forget to point out to your graphic cutter that the `O` is actually bigger than the other letters...

(go check if you don`t believe me!)

i can do the hondas in the 450mm long for £10 (a pair) posted if its any help, bit puzzled on the bigger 'O' though rick? In which direction? Would go and check but my bike is under a pile of bits. Can make any letter any size if you can advise.

see what you mean rick, at the 450mm long size the H N D A are 45mm high and the O is 50mm high. Never realised and done loads of these now.