Page 1 of 1
SP engine pick up
Posted: Sun May 15, 2011 11:18 pm
by dobbslc
Can anyone tell me what I need to do to get an SP engine to work in a standard bike?
Re: SP engine pick up
Posted: Sun May 15, 2011 11:25 pm
by 4hundread
V
Re: SP engine pick up
Posted: Mon May 16, 2011 5:54 pm
by dobbslc
Nice on e I'll have a look later, maybe this one will work......

Re: SP engine pick up
Posted: Mon May 16, 2011 6:05 pm
by stripes1976
if its a road bike run it on non sp carbs and you will have better bottom end and mid range than a std sp.
It makes for a better road bike than a standard sp then
Re: SP engine pick up
Posted: Mon May 16, 2011 10:45 pm
by 4hundread
K
Re: SP engine pick up
Posted: Wed May 18, 2011 6:02 pm
by dobbslc

Got the engine fired up today,
Battery, Fuel, choke, press button and it runs!!!! I can't believe that this thing has sat for two years and started that easily. Right into the gararge to do the swap ,lets hope this works.
Re: SP engine pick up
Posted: Wed May 18, 2011 7:33 pm
by 4hundread
U
Re: SP engine pick up
Posted: Thu May 19, 2011 8:12 pm
by dobbslc
Are the sp carbs bigger than standard ones? & will I need to swap the carb rubbers to match?

Re: SP engine pick up
Posted: Thu May 19, 2011 9:28 pm
by stripes1976
sp carbs are 35mm not 33mm on the non sp.
unless you have the sp airbox, loom and cdi stick with the 33mm carbs and inlet rubbers.