How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Wed May 04, 2011 11:13 am
by Sligeach
As promised the video of how to replace the fork seals in an early type fork.
This is the DIY method and can be undertaken by anyone with basic tools, I have not used any specilaist tools.
1. Allen Keys
2. Ratchet and sockets size 10, 14 and 24mm
3. A vice
4. A broom handle
5. Brake cleaner and rags
6. Misc. items like WD40, wire brush, Semi permenant thread sealant, rubber mallett, rubber gloves
To be honest its not the worlds best guide but better than nothing i suppose. i had to leave bits out as the video needed to be under 10 mins.
make it a sticky if you like
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Wed May 04, 2011 11:17 am
by sil3nt
Am i missing the video part of this post
Working now thanks a lot!
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Wed May 04, 2011 7:46 pm
by uber pikey
sil3nt wrote:Am i missing the video part of this post
no it's there can't you see it man?
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Wed May 04, 2011 9:04 pm
by Delboy
Stop messing with his mind Curt lol!
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Thu May 05, 2011 12:13 am
by Sligeach
youtube was being a pain. link fixed now
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Thu May 05, 2011 12:21 am
by porndoguk
Sligeach wrote:As promised the video of how to replace the fork seals in an early type fork.
This is the DIY method and can be undertaken by anyone with basic tools, I have not used any specilaist tools.
1. Allen Keys
2. Ratchet and sockets size 10, 14 and 24mm
3. A vice
4. A broom handle
5. Brake cleaner and rags
6. Misc. items like WD40, wire brush, Semi permenant thread sealant, rubber mallett, rubber gloves
To be honest its not the worlds best guide but better than nothing i suppose. i had to leave bits out as the video needed to be under 10 mins.
make it a sticky if you like
DIizmZ_OpSY if you put that and then put youtube brackets it will embaed within the post declan,
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Sat May 07, 2011 2:09 pm
by Akey
Thank you very much Sligeach, very helpful as always :-)
Re: How To Video: Replace Fork Seals (Early NC30 forks)
Posted: Sat May 07, 2011 2:54 pm
by Sligeach
No problem. Sure what else would i bet at on a 4 day holiday to the west of Ireland.
I have missed out bits but as i said before, gives a bit of food for thought al least.
Re: How To Video: Replace Fork Seals (Early NC30 forks)
make it a sticky if you like
