looking at doing the r6 conversion on the fzr has anyone got the technical drawings for the spacers as i use to have it now it seems to of disapeared of my pc dont you just love kids

cheers martyn

You need to ask Oolit he did the converter bit

oollit is the answer, £25 for the spacers and extension.... :D

I have fitte three too my 3 machines......

what year shock should i be looking for?

cheers martyn

Red spring type from the new shape R6

The r6 years that fit are the 2006 / 07 / 08 models
:D :D :D

Yep, just put an 07 on my EN2. You just need two 5mm spacers for the top mount and a set of longer dog bones. There's a guy on ebay always selling EXUP engraved dog bones (listed under 'FZR Jack up kit') which raise the rear 30-35mm. They do the trick and when it's all fitted, the rear ends up virtually at the same height it was with the standard shock and dog bones. On the EN2, I had to grind back some of the right hand side top mount casting on the bike to allow the shock's reservoir to clear when fitted. Someone I know did this and was good enough to show me and let me copy the mod.

Be sure to check ebay USA, i just got an o7 r6 shock for £15 and the postage was only £35.