Page 1 of 1
torque settings
Posted: Wed Feb 23, 2011 9:45 pm
by 4hundread
K
Re: torque settings
Posted: Wed Feb 23, 2011 10:33 pm
by vivo
The SP carbs wont be any good on the standard model. The SP has a throttle position sensor on the carbs and uses a different CDI.
Re: torque settings
Posted: Wed Feb 23, 2011 10:43 pm
by donk
rear wheel spindle 85-115 nM
front wheel spindle 50-80 nM
front spindle pinch bolts 20-31 nM
this is all ive got for the torque settings i got them off here hope this helps mate
Re: torque settings
Posted: Wed Feb 23, 2011 10:58 pm
by 4hundread
P
Re: torque settings
Posted: Wed Feb 23, 2011 11:12 pm
by Variablevalves suck
Head bearings are 40-50N.m yoke top nut is 50-80N.m
Swing rm torch is85-115N.m
Re: torque settings
Posted: Wed Feb 23, 2011 11:16 pm
by 4hundread
O