My mate pulled my gk76a apart to spray the subframe. But now I have come to wire it up, essentialy everything from the carbs back has been taken off the battery and subframe and unplugged. All the connecting blocks are self explanatory, but i wired it up to the best of my knowledge, and I have ignition lights, but when I press the starter motor there is nothing.

Can anyone help me out.

All I can see is 2 wires off the starter solenoid, and a red wire with a bridge coming off the fuse box

on the more forward of the wiring loom there are 3 single connectors all coloured the same, you should play about with them, one (second longest) is what directly controls the starter motor, you should also check the relay just behind the solenoid to see if there's a current getting to it

Send me an email me if your still struggling as mine is spripped and will be for another 2 weeks, could take some photos and match it to mine?? mine still runs, havnt taken any wires off yet except the indicators

rich.dodd@live.co.uk