So i finally started to repair the other halfs 76 and all was going well until i came to plugging the CDI into the new loom. There is an orange cable that looks like it should be in one of the plugs for the CDI but i've no idea which one it goes into!
could one of you fine gents have a quick butchers and let me know where the orange cable goes please? Any pics would be much appreciated!

Also where does the oil temp sender on the front of the engine plug into the loom?

i did try the manuals section but none of th links worked for me!?!?!?

Thanks in advance
Griff

this is what mines like my cdi number is 32900-33c10 i dont know if theres a difference my bikes a 1990 76a

top of cdi/with the serial number on it

(brown ) (black/blue) ________ (orange/white) (black/yellow)


(green/yellow) (none) ________ black/white) (white)



3 wires in the small plug on the left and 4 wires in the large plug on the right

hope this helps mate

donk wrote:this is what mines like my cdi number is 32900-33c10 i dont know if theres a difference my bikes a 1990 76a

top of cdi/with the serial number on it

(brown ) (black/blue) ________ (orange/white) (black/yellow)


(green/yellow) (none) ________ black/white) (white)



3 wires in the small plug on the left and 4 wires in the large plug on the right

hope this helps mate

Many thanks for the response mate. I think its the same CDI number as mine so thats just what i was after.
I will do some more investigation Monday and give it a try.

All the best Griff