Just pulled apart a set of NC30 carbs to find these



They look nothing like any NC30 slides ive seen before and have 3 holes in the bottom instead of the standard 2. Can anyone id these please? NC24?

FYI the bike they came off run like shit if it started at all but i also found a few other problems inside which no doubt would have caused the bike to run like shit.

Uk dude

Ah i see, so whats the deal with the extra slide hole? im guessing theres no need to drill the slide to 2.5mm with the extra hole?

I really should know this

Yep.. UK 30.

There isn't any need to drill the hole bigger.

The NC24 slides have rounded bottoms and the two holes are next to each other :-)

Cheers neo, there were no needle washers either, is this another UK carb thing?

i know the emulsion tubes are different too on the uk carbs. not sure about the needles.

we need a definative carb, needle, jet library i think.
Neo - you up for helping me compile this ?

There fitted with standard J15A + B needles, emulsion tubes look identical to the 4 and 5 hole tubes in my Jap spec carbs.

on the library,

CRM wrote:i know the emulsion tubes are different too on the uk carbs. not sure about the needles.

we need a definative carb, needle, jet library i think.
Neo - you up for helping me compile this ?

Yep that sounds good.

How about an Excel sheet?

Once it's all filled up we could export it to a PDF to stop people tinkering with it and put it on the site?

http://images.cmsnl.com/img/partslists/ ... 1_727d.gif

Are these UK carbs?

yep good call, a word doc to include pics too then like you say pdf to seal it up.

CRM wrote:yep good call, a word doc to include pics too then like you say pdf to seal it up.

can you change neos username to the ORACLE is there anything he doesnt know or cant do.