Page 1 of 1
GSXR 400 SP 1993 INTAKE - INLET RUBBERS
Posted: Tue Aug 17, 2010 8:15 pm
by martinstephensons
HI ALL
DOES ANYBODY KNOW WHERE I CAN GET AN INTAKE OR INLET RUBBER FOR THE GSXR400SP ON A K PLATE 1993 MODEL. ONE OF MINE I HAVE NOTICED IS SPLIT .
OR DOES ANYONE KNOW IF ANY DIFFERENT MODEL IS THE SAME.
MANY THANKS
Re: GSXR 400 SP 1993 INTAKE - INLET RUBBERS
Posted: Tue Aug 17, 2010 9:12 pm
by stripes1976
i'll have a look tomorrow night when i'm in the garage
Re: GSXR 400 SP 1993 INTAKE - INLET RUBBERS
Posted: Tue Aug 17, 2010 11:38 pm
by martinstephensons
many thanks Your a top guy.
I stripped the carbs back out and checked everything again today plus the other things that you told me to check.
and thats when i noticed the split may be that has something to do with it not starting.
i also noticed when the bike is turning over there is a slight hissing noise which i beleive maybe coming from the vacuum pipe
so will have a look at that tomorrow as well as if it is not making a vacuum suction then the fuel will not be getting pulled through.
many thanks for all your help though..