hi the indicators on my nc24 have stoped working on the left side of the bike . tryed changeing the bulb but still not working .just wondering if any one could help me out with some info many thanks

wayne84 wrote:hi the indicators on my nc24 have stoped working on the left side of the bike . tryed changeing the bulb but still not working .just wondering if any one could help me out with some info many thanks

probally a knackered relay, fuse, or switch at the Left handle bar, (nc30 location) = check your conections down on posibly the lhs of engine make sure the 2 connectors are conected,

check the volatage at the relay when on and bulb holders, listen to hear if it clicks etc, its going to be something simple i assure you just fault finding really.

also check the fuses?

hi i cheked the fuse . had a little play about with them and they came on then wen i turned them off they wud not turn back on . So guna take switch off and check it and check the wires. Thank u very much 4 ur replay glad u cud help me

Switch could be knackered.

try blasting it with WD-40 (stick the staw attachment into the hole and give it some)

its not clicking wen u swith it over the right hand side makes a clicking noise. cud defo be the switch that has gone